Tracker’s first 21-footer is brand-new for 2025. It features a 0.125-inch-thick all-aluminum hull with an innovative PowerCurve transom that closely mimics the compound, smooth transom of a fiberglass boat (and looks great). The pad V-hull features a limited lifetime hull warranty and five-year bow-to-stern complete nondeclining warranty covering ­included components and accessories.

Sporting a Mercury 200 Pro XS outboard, the 215 tops out at just over 63 mph turning a Mercury Tempest 21-inch-pitch propeller. It’s nimble too, hitting 30 mph in 4.9 seconds from a dead idle. With a full 40-gallon fuel tank, its range is over 183 miles at its most economical cruising speed of 27 mph, where we recorded 5.3 gph and 5.1 mpg. 

The Big Catch package features a gimbal-­mounted 9-inch Garmin 93sv graph on the bow, a Minn Kota Ultrex trolling motor, and a second Garmin 93sv graph in the console. This will be a must-have for serious anglers. 

Twin rod lockers with 12 rod tubes each surround a center box capable of holding eight more rods and 3700 tackle boxes, with tool and tackle holders. A cooler is fitted under the step down into the cockpit.

The pilot’s console is sleek and ­compact, with a low-profile windshield. Performance options include a foot throttle and Bob’s Machine hydraulic jack plate (an 8-inch setback manual jack is standard). Dual bucket seats flank a center-mounted buddy seat; there’s an optional coin box that fits there for more light storage, with a built-in catch measuring ruler.

The Tracker features an integrated dash display that shows engine data, including speed, rpm, engine temp and more, reserving real estate on the Garmin display for what anglers want it to do—give them sonar and navigation data.

Aft, a 25-gallon baffled livewell sits just behind the cockpit. Two storage boxes on the aft casting deck flank an access lid to the stern compartment, which gives access to the batteries, optional onboard charger, pumps and plumbing. There’s an integrated boarding ladder on the port side curved to match the transom.

High Points

• PowerCurve transom and hull give a sleek appearance comparable to a fiberglass boat. 
• Removable portside navigator’s console makes the 215 convertible from a single to a dual-console boat. 
• Anglers, order the Big Catch pack with trolling motor and twin 9-inch graphs.

How We Tested

• Engine: Mercury 200 Pro XS FourStroke outboard
• Drive/Prop: Outboard/Mercury Tempest 14 ⁵/₈” x 21″ 3-blade stainless steel
• Gear Ratio: 1.75:1 Fuel Load: 20 gal. Crew Weight: 250 lb.

Pricing and Specs

The post 2025 Tracker Savage 215 appeared first on Boating Mag.

Tracker’s Targa series offers a deep, wide and sturdy multispecies fishing platform that doubles as a family-­fun boat when the fish aren’t biting. It’s a high-value package, fully accessorized for fishing and at a nationally advertised, no-haggle price of just under $43,000 complete with trailer. Mercury’s 150 pushes the V-18 Combo to 44 mph and 5,500 rpm, and it storms to 30 mph in just 5.3 seconds. Its 40-gallon tank provides nearly 210 miles of range at 22.6 mph and 3,000 rpm, making nearly 6 mpg. It’s clear the Targa is built to take big-water and high-load punishment. It slices through afternoon wakes and wind chop sweetly, and makes hard-over turns confidently. The all-welded 0.125-inch-thick aluminum hull, transom and stringer system carries a limited lifetime warranty.

The bow casting deck has a handy 19-gallon lighted, aerated livewell and Minn Kota trolling motor. A molded bow storage compartment also doubles as a cooler, while a center lockable rod-storage locker holds rods up to 7 feet, 6 inches.

The twin consoles amidships feature high windshields for excellent wind protection. The portside console features lockable storage with integrated tackle storage. The captain’s side console features SeaStar tilt hydraulic steering and a Bluetooth stereo, with a full complement of engine gauges and ample space for necessary sonar and navigation electronics.

The cockpit seating features four swiveling, removable pedestal folding seats that can be relocated to the casting decks for comfortable angling. Plus, the aft casting deck features twin folding jump seats that flank a center-mounted, aerated 15-gallon lighted livewell with an integral bait bucket. The gunwales feature full-length nonskid covering for sure-footed line handling and boarding, with top-loading rod lockers that can handle 9-foot rods. The three batteries and an onboard charger are standard.

The Targa V-18 Combo has everything to be a hardcore fishing machine, but the optional thick sun-pad cushions for the bow and the ample arrangement of bucket seats in the cockpit plus transom jump seats make it an excellent family cruiser as well.

High Points

• Wide aft casting deck with built-in folding jump seats combine fishability with comfort.
• Tall consoles and high windshields keep the cold out.
• Top-loading rod lockers can handle 9-foot rods.
• Hydraulic steering and stereo are standard.

How We Tested

• Engine: Mercury 150 XL FourStroke outboard
• Drive/Prop: Outboard/Mercury Enertia Eco 16″ x 17″ 3-blade stainless steel
• Gear Ratio: 1.92:1 Fuel Load: 40 gal. Crew Weight: 250 lb.

Pricing and Specs

The post 2025 Tracker Targa V-18 Combo appeared first on Boating Mag.

Tracker’s Pro Team 175 Tournament Edition brings style, fishability and performance together at a value price. Rigged with a thrifty Mercury 75 hp outboard, it scoots to 41 mph. It’s a powerful and well-equipped fishing package.

Mercury’s 75 hp FourStroke, fitted with a 17-pitch standard aluminum propeller, zings this 17-footer to 30 mph in just 7.6 seconds. Fuel costs won’t break the bank; at its best cruise speed of 25 mph at 3,500 rpm, it burns just 3 gph to deliver over 8 mpg. With a 21.5-gallon tank, that ­calculates to a 160-mile range, leaving 10 percent in reserve. A whole weekend of fishing for less than $100 is truly ­economical.

For its low price tag, this boat’s ­offerings are top-shelf in construction and accessories. The hull is all-welded, 0.100-gauge aluminum and carries a limited lifetime warranty. It’s finished in ­Diamond Coat powder coat, available only on ­Tracker hulls. Lifting strakes and chines are pressed in, not riveted on, for a cleaner look, less drag on the water and more durability. Its quiet ride comes from better hull stiffening and added foam (10 percent more than required by USCG standards) for sound-deadening.

A Minn Kota Edge 12-volt trolling motor is standard, mounted on the bow with a recessed tray for the control ­pedal. ­Upgrading to a 24-volt is an option. An ­elevated bow deck houses a center tackle-storage locker flanked by port and starboard rod lockers that accommodate up to 16 8-foot rods. A 30-quart insulated cooler is standard.

The driver’s console on this model is a new ­roto-molded design, fitted with a Tracker touchscreen digital gauge display and standard Lowrance Hook graph. Single-­cable, no-feedback steering is standard and performed smoothly in our tests. New, more comfortable pilot and navigator seats make long rides enjoyable. In the elevated aft casting deck, two molded dual storage boxes house three Plano 3700 tackle boxes each. A 21-gallon aerated livewell with a divider, timer and pump-out system is standard.

All that plus a custom trailer make this rig fishing-ready for family fun.

High Points

• Portside console is removable for versatility. 
• Standard Minn Kota Edge ­trolling motor.
• Exclusive Diamond Coat 3.0 finish.
• Versatrack mounting channels in gunwales

How We Tested

• Engine: Mercury 75 FourStroke outboard
• Drive/Prop: Outboard/Mercury Enertia 13 1/4″ x 17″ 3-blade aluminum
• Gear Ratio: 2.07:1 Fuel Load: 8 gal. Crew Weight: 250 lb.

Pricing and Specs

The post 2025 Tracker Pro Team 175 Tournament Edition appeared first on Boating Mag.

YOU MAY ALSO LIKE:

Building a Boat For Bowfishing

Fishing Bow Buying Tips

•The Grizzly jon boat is flat-bottomed for superior stability during the chaos of a successful shoot. There’s space enough in it for several shooters to safely draw, release and retrieve the arrow.

•The shooting deck gives a vantage point to see farther and deep into the water. It’s removable for fishing or waterfowl hunting.

•Lights surround the deck to illuminate the whole waterway and fish below. LEDs operate on 12 volts and are safer for boaters to maintain than AC current.

•A gas-powered generator to run a 12-volt charger is essential to keep lights lit.

•Easy-to-clean, nonskid decking, like this dense foam surface, quiets footsteps whether fishing, bowfishing or duck hunting.

•The foot-operated trolling motor is silent to sneak up on fish. A 24- to 36-volt system is required, and electronic pedal steering is essential to keep the bow hands-free.

•Rod holders, arrow quivers and cold-drink holders keep essentials in easy reach.

The post The Making of a Bowfishing Boat appeared first on Boating Mag.

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

btgbg14_fsh_tracker_pro team_8.jpg

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker Pro Team 175 TXW

Tracker’s Pro Team 175 TXW has been the company’s best-selling bass boat for years, and it’s banking on raising the bar on that number with the all-new 2014 model. How? A brand-new factory in which to build a fully featured, top-shelf aluminum boat for a price comfortable to most family budgets.

The new Pro Team 175 TXW is powder-coated, not painted. Tracker calls it Diamond Coat for its tough brilliance. The durable finishing process, applying color and clear-coat to the entire hull for a deep and durable shine, is practical only to a builder of Tracker’s scale. It also is a nod to the environment, reducing to nearly zero volatile organic compound emissions.

Our test boat was equipped with a quiet, economical Mercury 60 hp four-stroke outboard (our only option) on a stepped transom for added efficiency. The rig made 7 miles per gallon even at wide-open-throttle speed of 35 miles per hour. At that rate, a 21-gallon tank can keep anglers fishing two or three days. The all-welded hull is solid and in our tests was comfortable in light wind chop or when crossing others’ wakes. Its shallow draft assures anglers can get to the honey holes deep into the creeks and flats.

A full quiver of standard features gives all that’s necessary to pursue any angler’s species of choice. For tournament anglers, a central locker can secure rods or tackle or a combination of both. A dividable livewell has a powerful aeration system to keep the catch alive. For walleye and crappie anglers, the forward 19-gallon livewell features a bait bucket holder. The livewell is powered by 500 gph pumps, on timers for convenience.

Just as on the full-size bass boats, Tracker recesses the standard 12-volt Minn Kota trolling motor pedal for comfort and to reduce fatigue. A tool and drink holder fits ahead of it, and a trim switch for the motor allows adjustments when demanded.

For comfort, the cockpit has three-across seating with two bucket seats and a center jump seat that folds down, offering an easy step to the aft platform. The driver console is suspended from the gunwale and foredeck bulkhead, making it easy to slip your legs beneath.

The Pro Team 175 TXW has many competitors in its category but few that offer this complete package of power, equipment and durable good looks as standard equipment.

Buyer’s Spotlight
*Brilliant powder-coating colors are corrosion resistant.
*Custom trailer has E-Z Lube bearings, radial tires and swing-away tongue.

Specs
LOA: 17’7″
Beam: 7’5″
Dry Weight: 993 lb.
Seating/Weight Capacity: 4/555 lb.
Fuel Capacity: 21 gal.

How We Tested
Engine: 60 hp Mercury 60 4-stroke EFI
Drive/Prop: Outboard/103/8″ x 14″ 3-blade aluminum
Gear Ratio: 1.83:1
Fuel Load: 15 gal.
Crew Weight: 235 lb.

Price
$17,020 (with test power, plus freight, destination charges)

Contact
Tracker Boats
Springfield, Missouri; 417-873-4555; trackerboats.com

The post Bass Tracker Pro Team 175 TXW appeared first on Boating Mag.

The driver’s console leaves room on the centerline for a large in-deck rod locker, capable of handling six to eight casting rods. (A dual-console version with walk-through windshield is also available.) Storage abounds in a variety of side and in-deck lockers. There are two aerated livewells: a 19-gallon in-deck well forward and a 28- gallon variety aft. An optional fishing package ($400) adds a Minn Kota trolling motor, Lowrance Xs1 fish finder and a dedicated Interstate trolling battery with onboard charger.

The Pro Guide V-175 shares the same hull design and construction as the company’s Targa models and provides the same roughwater capabilities. This rugged pedigree begins with a two-piece, all-welded hull and a beefy 25-inch aluminum transom designed to absorb the forces of rough water and to support a kicker motor. To further reinforce the hull, Tracker utilizes full-length longitudinal stringers supplemented with substantial grid-style cross members.

Though passengers in an open boat will never have the same protection that a full windshield can provide, the 175’s sharp bow and spray chine did tame spray in our choppy conditions. Though it carries a good deal of deadrise, the hull provides enough lift to operate efficiently with a midsize engine. Powered by a 90 hp twostroke, it came on plane at half throttle and topped out just under 40 mph.

Extra Points
• The center rod locker will accommodate rods of up to eight feet in length.
• The hull’s reverse chines enhance stability and knock down spray for a dry ride.
• Fishing chairs can be placed in five positions to accommodate all manner of casting, drifting and trolling setups.
• In-deck storage lockers feature aluminum lids for greater strength and durability.

Test Drive * Test Engine: Mercury 90 HP Optimax * Test Prop: 13″ X 9″ aluminum * Test Load: People (400 LB.) Fuel (21 GAL.) * Top Speed: 39.4 MPH @ 5,600 RPM * Time to Plane: 3.8 sec. * Time to 30 MPH: 7.8 sec * Most Economical Cruise Speed: 20.5 MPH @ 3,250 RPM, 2.6 GPH Vital Stats * Length Overall: 17’3″ * Beam: 8’5″ * Seating/Weight Capacity: 5/760 LB. * Fuel Capacity: 28 GAL. * Max HP: 135 * MSRP: $18,595 ( as tested, plus freight and prep) * NMMA Certified: Yes

The post Tracker Pro Guide V-175 appeared first on Boating Mag.

Tracker has gone to great lengths to make the Avalanche standout among aluminum or fiberglass boats. Take the five-step paintingprocess. Each Avalanche gets an acid bath to eliminate impurities.Then it’s etched and given a vinyl undercoat before the paintis baked on — the same process car companies use. A clear-coat isadded to that.

The interior is different, too, with high gunwales in thecockpit. The depth provides a secure ride at 60 mph, but itdoesn’t impose on casting. That’s because the 96-inchbeam (as opposed to the typical 89-inch beam) allows monstrous bowand stern casting platforms — among the biggest in the 18-footclass. It also allows for a divided livewell aft. The livewellrecirculates with a switch on the dash, and the water isautomatically replaced every three to four minutes.

Conveniences like a dash-mounted Humminbird fish finder, a67-pound-thrust Motorguide trolling motor and removable tackletrays are all standard. The dash isn’t skimpy either, with avoltmeter and water-pressure gauge in addition to fullinstrumentation.

It’s a thrill to pop onto pad and pass other boaters inthis red rocket. We had the Avalanche trimmed and the throttlemaxed at 5,600 rpm. It was windy and the lake was moderately rough,so 63 mph was legit with 150 horses. The number we still find hardto believe is 20,645 — dollars, that is. That’s the packageprice, and it includes a matching trailer with disk surge brakesand chrome wheels.

Final Take: Adrenaline rush from first glance

We Also Like …

1. Two deep rod lockers flank the bow, with rod straps on deckfor security on the fly.

2. Cooler built into the bow step drains to the bilge.

3. Rub rails are exceptionally thick and sturdy to preventdings.

4. Glove box is built into the bow platform in front of thepassenger seat.

5. Rod straps aft on the port side.

6. Stainless-steel grab handle for passenger will get used.

DETAILS

Length Overall: 18’2”

Beam: 8’

Dry Weight: 1,370 lb. (w/out motor)

Seating/Weight Capacity: 5/995 lb.

Fuel Capacity: 41 gal.

Max HP: 175

MSRP (test boat): $20,645 (not including freight andrigging)

Contact: 417-873-5900

PERFORMANCE

Test Engine: Mercury 150 XR6

Test Prop: 14.675 x 23 ventilated, stainless steel

Test Load: Fuel (11 gal.); People (190 lb.)

Top Speed: 63.0 MPH @ 5,600 RPM

Time to Plane: 2.0 sec.

Time to 30 MPH: 5.9 sec.

Minimum Planing Speed: 22.0 MPH @ 2,400 RPM

Noise at Idle: 59 db

Noise at 30 MPH: 80 db

Cruise Stats: 86 db; 46.1 MPH @ 4,200 RPM

POWER CURVE

RPM MPH

600 3.5

1,000 5.6

1,500 7.1

2,000 9.5

2,500 23.0

3,000 30.2

3,500 35.5

4,000 42.8

4,500 48.4

5,000 52.6

5,500 60.9

5,600 63.0

The post Tracker Avalanche 18 SC appeared first on Boating Mag.

Boaters, being no fans of change and used to the curves of wood and fiberglass, snub boxy aluminum boats because they look…well, boxy. One friend calls them floating industrial refrigerators. Our complaints have been justified in the past, but now there’s a new kid in town.

At a recent BOATING boat test rally, we came across Tracker Marine’s Tundra 18 (“Multiple Personalities,” April). It’s an aluminum alloy, deep-V multispecies fishboat that even up close looks as smooth as glass. How did it pull off this deception? We talked with the folks at Tracker Marine to find out.

Forming an Opinion. The Tundra’s hull-two bottoms, two sides, and, of course, a transom-is welded together. No big surprise. What’s interesting is that Tracker builds its boats using a process called stretch forming, which is similar to the way some aircraft and high-end automobiles are made. This is different from the more common method of fitting one flat sheet to another to form a predetermined shape. Stretch forming works by using robotic tooling and a high-grade 6000 series aluminum alloy. With these tools, hull-plating sheets are stretched around a mold to achieve desired curvature. This mold can be made of concrete, steel, fiberglass, or a combination thereof. So what are the practical applications? The advantages of stretch forming become clear when we examine the hullform, structural integrity, and appearance of the finished product.

Hull-abaloo. The stretch-forming process allows strakes and a pad to be formed into the aluminum sheet rather than being welded onto its surface. Welding causes heat distortion to the hull surface and results in a loss of hydrodynamic efficiency. The bow is positively affected during stretch forming. Because deep bow sections with reversed chines are incorporated with stretch-formed parts, these sections allow a sharper entry (more V in the keel and stem). Reversed chines deflect spray and air down, under, and away from the boat. The results? A drier ride. Lastly, the stepped, stretch-formed transom maximizes efficiency of the engine and trim.

Strong Arm Tactics. Aluminum boats are known for their strength. “Work hardening” of the aluminum skin during the stretch-forming process, especially in the areas of the deepest contours, yields even more strength than other building techniques. As marine alloy is stretched, bent, or pressed, the molecular structure aligns so that the pounds per square inch (psi) increases. The shapes that are stretch formed into the bottom, sides, bow, and transom provide stiffness to all areas.

If Looks Could Thrill. Check out the Tundra 18. Run your hand over it. Move in closer. It looks and feels like fiberglass. Stretch forming gives the boat its curves, but what about its finish? Tracker uses an automotive paint process. After completion of the hull and prior to the assembly of the interior, a high-grade acrylic polyester enamel-modified for scuff resistance-is baked on. The shell cooks at 180 degrees for 40 minutes, resulting in an excellent finish. Add to that the thick, heavy-duty rubrail, and it’s easy to think you’re looking at a boat made of fiberglass.

The post Easy to be Hard appeared first on Boating Mag.